Filter
Top Products
91
Video Memory (OB2000 & OB5700 Only)
(HP Authorized Service Providers Only)
NOTE:
Only the OmniBook 2000 and 5700 contain video memory that is replaceable.
This repair procedure is not applicable for the OmniBook 5500.
Also be aware that the Video Memory Board contains only 1MB of the total 2MB of
video RAM on the system. The other 1MB of video RAM is integrated with the
Logic PCA Board. Therefore, to replace all of the video RAM, the Logic PCA
Board must be replaced (the replacement logic PCA will contain a new video RAM
board).
Required Equipment
• Small phillips screwdriver
• 5mm hexdriver
Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Follow the Logic PCA Board Removal Procedure on page 85 to gain access to the Video
Memory.
4. Remove the one necessary screw on the Logic PCA Board. See Figure 45.
5. Rock the Video Memory Board gently back and forth to remove.
Replacement Procedure
Figure 45 - Video Memory Removal
Video Memory Board
F1350-60922
Video RAM Screw
F1320-60963