Filter
Top Products
HP OmniBook 6000 Troubleshooting and Diagnostics 3-19
Code Suggestions
9016h Reset the computer. Reprogram the BIOS IC.
Replace the power supply PCA. Replace the
motherboard.
9017h See chapter 5 for cosmetic guidelines. If
warranted, replace the display assembly.
CD-ROM Tests
0A00h Insert a CD in the drive.
0A01h Repeat the test. Replace the CD-ROM drive.
0A02h No repair. (Automatic close not supported.)
0A03h Insert a different CD in the drive and repeat the
test. Check the connectors on the CD-ROM
drive and motherboard. Replace the CD-ROM
drive. Replace the motherboard.
0A04h Insert a data CD in the drive and repeat the
test.
0A05h Insert a different CD in the drive and repeat the
test. Check the connectors on the CD-ROM
drive and motherboard. Replace the CD-ROM
drive. Replace the motherboard.
0A06h Insert a data CD in the drive and repeat the
test. Replace the drive.
0A07h Repeat the test. Replace the drive.
0A08h Insert an audio CD and repeat the test.
Replace the drive.
0A09h Repeat the test. Replace the drive.
0A10h –
0A11h
Insert an audio CD and repeat the test.
Replace the drive.
0A12h Insert a different multisession CD and repeat
the test. Replace the drive.
SMBUS Tests
0E00h –
0E20h
Replace the motherboard.
ATAPI Removable Tests (LS-120)
0F01h Connect the LS-120 drive and repeat the test.
0F02h –
0F03h
Insert a different disk in the LS-120 drive and
repeat the test. Check the connectors on the
LS-120 drive and motherboard. Replace the
LS-120 drive.
0F04h Replace the LS-120 drive.
0F05h Repeat the test. Replace the LS-120 drive.
0F06h Insert a different disk in the LS-120 drive and
repeat the test. Check the connectors on the
LS-120 drive and motherboard. Replace the
LS-120 drive.
0F07h Replace the LS-120 drive.
0F08h Insert a different disk in the LS-120 drive and
repeat the test. Check the connectors on the
LS-120 drive and motherboard. Replace the
LS-120 drive.
0F09h Replace the LS-120 drive.
TI CardBus Tests
1201h Remove any attached ISA or PCI cards and
repeat the test.
1202h –
1203h
Replace the motherboard.
1205h –
1206h
Insert a different PC Card and repeat the test.
Replace the PCMCIA socket. Replace the
motherboard.
1207h Reset the computer. Replace the motherboard.
Code Suggestions
USB Tests
1301h Reprogram the BIOS IC. Replace the power
supply PCA. Replace the motherboard.
1302h –
1316h
Replace the motherboard.
9006h (See USB Port Test below.)
DVD Tests
1900h –
1902h
Insert a different DVD in the drive and repeat
the test. Replace the DVD drive.
LAN/Modem Tests (3Com modem ONLY)
8000h Note: the test checks only the internal
hardware up to the mini-PCI card, and does not
check the mini-PCI panel or any external
cabling.
Repeat the test with the LAN cable/phone line
unplugged. Replace the cable/phone line.
Check the connections. Replace the mini-PCI
card. Replace the mini-PCI panel. Replace the
motherboard.
Fan Tests
9001h If the fan is already running, you will not hear a
change. Check the fan connection. Replace the
heatsink. Replace the motherboard.
9002h Reset the computer. Replace the motherboard.
USB Port Test
9006h Make sure a USB device is connected to the
port you are testing. Select the correct speed
for the device. Try another USB device.
Replace the motherboard (or dock component,
if applicable).
IR Tests (FIR enabled, undocked)
9002h Reset the computer. Replace the motherboard.
9007h –
9008h
Reset the computer. Run BIOS Setup and
restore default settings. Replace the power
supply PCA.
9009h Do not run this test in Windows. For the one-
unit test, replace the motherboard. For the two-
unit test, make sure the IR ports on the
reflector and test computers are lined up,
replace the motherboard.
900Ah Repeat the test. For the two-unit test, make
sure the IR ports on the reflector and test
computers are lined up. Replace the
motherboard.
900Ch Repeat the test. Make sure the IR ports on the
reflector and test computers are lined up.
Restart the reflector unit. Replace the
motherboard.
Dock Tests
9071h,
9073h
Update BIOS in computer. Replace electronics
PCA in dock.
9075h –
907Ah
Replace electronics PCA in dock.
907Bh Replace LED/button assembly in dock.
9082h Rerun test with known good computer. Replace
electronics PCA in dock.
9088h Replace electronics PCA in dock.
Hard Disk Tests
9602h
Failure may occur soon. Back up data and
replace the hard disk.