Filter
Top Products
Starting Out with Your OmniBook
Special Features
1-26
5. CAUTION: handle the hard drive only by its edges to avoid damage from
electrostatic discharge .
Disengage the hard drive connectors by grasping the left flap of the plastic
insulator and pulling to the right as shown. Lift up on the insulator sheet and
remove the hard drive. The insulator sheet stays in place.
6. If your new hard drive is from a different manufacturer than the old one, it may
have screws in different positions. Determine which mounting holes you need;
then, if necessary, push out rubber screw-hole covers from the inside using a
bent paper clip. (From the outside of the computer, insert the rubber covers
into the holes you won't need.)