HP (Hewlett-Packard) 800 Laptop User Manual


 
Specifications, Regulatory, and Safety Information
Regulatory Information
3-9
Europe
Products sold in Europe by Hewlett-Packard and its authorized dealers meet the
specifications listed below.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
Manufacturer:
Hewlett-Packard Company
Address:
Hewlett-Packard Co.
Mobile Computing Division
1000 NE Circle Blvd.
Corvallis, OR 97330
declares that the following product
Product name:
HP OmniBook 800 , all models
Options:
All
conforms to the following product specifications
Safety:
IEC 950:1991+A1,A2 / EN 60950 (1992)+A1,A2
EMC:
CISPR 22:1993 / EN 55022 (1994): Class B*
EN 50082-1:1992
IEC 1000-4-2:1995 / prEN 55024-2 (1992): 4kV CD, 8kV AD
IEC 1000-4-3:1995 / prEN 55024-3 (1991): 3V/m
IEC 1000-4-4:1995 / prEN 55024-4 (1992): 0.5kV signal lines, 1.0kV power
lines
Supplementary
Information:
The product herewith complies with the requirements of the EMC Directive
89/336/EEC and the Low Voltage Directive 73/23/EEC.
The HP F1044B ac adapter used with this product is disconnected from the
power by unplugging the power cord from the power outlet. Therefore, the
power outlet should be located close to the product and be easily accessible.
This declaration also applies to these dedicated peripherals and modules used
with the OmniBook 800:
HP F1059C External Floppy Disk Drive, HP F1196C Quad Speed CD-ROM Drive,
HP F1044B AC/DC Adapter
*The product was tested in a typical configuration with Hewlett-Packard
personal computer peripherals.
Quality Department
Hewlett-Packard Company
Mobile Computing Division