Filter
Top Products
HP Omnibook XT6050, XT/VT6200 Removal and Replacement 2-15
Removing the Heatsink (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
•
Knife or scraper.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery and any secondary battery module.
2.
Remove these additional assemblies:
•
Power button panel (page 2-11).
•
Keyboard (page 2-13).
3.
Disconnect the fan cable. Access the cable through the opening in the heatsink (near the fan).
4.
Remove all five retaining screws.
Figure 2-12. Removing the Heatsink
Fan cable
Fan cable socket
IMPORTANT: See the
Caution on the next
page before reinstalling
the heatsink!
Screws, M2.5×6mm (5)