Filter
Top Products
HP Omnibook XT6050, XT/VT6200 Removal and Replacement 2-17
Removing the CPU Module
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
•
Small flat-blade screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery and any secondary battery module.
2.
Remove these additional assemblies:
•
Power button panel (page 2-11).
•
Keyboard (page 2-13).
•
Heatsink (page 2-15).
3.
Turn the lock screw one-half turn counterclockwise to release the CPU module, and carefully lift
the CPU module off of its socket on the motherboard.
Figure 2-13. Removing the CPU Module
CPU module
lock screw
CPU module
(screw location may vary)