30
6. Restrictions on Schedule function
This model supports the Schedule function on the Projector Web Control feature.
(
Network Guide → 3.1.7 Schedule Settings) There are some restrictions on
the functions when Intellectual Stack with RS-232C connection is used. But for
Simple Stack without an RS-232C connection, there is no restriction on the
functions.
Regardless of whether Intellectual Stack or Simple Stack is used, take note of the
Schedule settings before using the Stack function. Unexpected setting changes
may occur when using the Stack function.
Refer to the following for the restrictions concerning Intellectual Stack. If you are
using Simple Stack, skip this chapter.
(continued on next page)
: This Schedule can be input to Projector Web Control and be executed even if
the projectors are operating in Intellectual Stack.
*1): This Schedule can be input to Projector Web Control even if the projectors
Restrictions on the Main projector
Functions
LAMP MODE
DUAL ALTERNATE
DUAL/
ALTERNATE
Power
status
Main ON ON OFF OFF
Sub ON OFF ON OFF
Power On
Power Off
Input port change
*1)
*1)
*1)
*1)
My Image
X *2) X *2)
Messenger
X *2) X *2)
Slide Show X *3) X *3) X *3) X *3)
Restrictions on the Sub projector
Functions
LAMP MODE
DUAL ALTERNATE
DUAL/
ALTERNATE
Power
status
Main ON ON OFF OFF
Sub ON OFF ON OFF
Power On X *3 X *3 X *3 X *3
Power Off
Input port change
*1)
*1)
*1)
*1)
My Image
X *2)
X *2)
Messenger
X *2)
X *2)
Slide Show X *3) X *3) X *3) X *3)