Filter
Top Products
3-74
Chapter 3
Making Copies
11. Typical Function Combinations
Making Different Types of Copy
These pages explain about how to combine different functions to make various types of copy.
1. Shows whether the copy is 1-sided or 2-sided.
2. Shows what type of copy you want to make.
3. Shows how to load your original. ☞p. 3-4
4. Shows which to set, either 1, 2, 2in1, or 4in1 for Original Copy. ☞p. 3-34
5. Shows which to set, either Corner Staple, 2-Point Staple, or Hole-Punch for the finishing function.
☞ p. 3-20
6. Shows the margin position to be set for your original. ☞p. 3-37
7. Shows the file margin function to be set as an auxiliary function. ☞p. 3-54
8. Shows that the stapling position or hole punch positions must be set using the Select Position key.
☞p. 3-23, 3-24
*The marker “-“ in the table indicates that no key setting is necessary.
Reading the Table
Intended Type of
Copy
Loading the
Originals
Copy
Finishing
Functions
Margin
File
Margin
Select
Position
1 2
2
Corner Staple
2
Hole Punch
2-Point Staple
Turn over
Turn over
▼
21 3 4
5
6 7 8
▼