Filter
Top Products
2-19
Chapter 2
Getting to Know Your Copier
7. Auxiliary Functions
Auxiliary functions
The Panel Reset key resets all control panel
settings to default settings including the number of
copies and zoom ratio. The settings just made
would also be cleared.
Useful Tips
• The Panel Reset key enables you to cancel all
previous settings at the touch of the key.
• To avoid miscopy, try to press this key before
making any setting for your own copy job.
If no key on the control panel is pressed within 1
min. after a copy cycle has been completed or
copying settings made, the Auto Panel Reset
function is activated to return the copier to the
default settings.
Useful Tip
The time for the copier to enter the Auto Panel
Reset Function can be selected from among “30
sec.”, “1 min.”, “2 min.”, “3 min.”, or “5
min.” For details, see User's Choice. ☞p. 4-18
If you load originals into the document handler or
place an original on the Glass and press the Start
key while the copier is warming up after it has
been turned ON, the Auto Copy Start function
allows that copy process to be started as soon as
the copier completes warming up.
The Auto Shut OFF function shuts down the
copier a given period of time after the copier has
been used last. The initial setting is 90 min.
Useful Tip
The time for the copier to enter the Auto Shut
OFF mode can be selected from 15 to 240 min.
The Auto Shut OFF function can even be
disabled.
For details, see User's Choice. ☞p. 4-18
If the copier is shut down when it is not in use, it
takes the copier some time to complete the warm-
up cycle. Instead of turning the copier OFF, it’s a
good idea to use the Energy Saver mode which
will minimize the time for the copier to complete
the warm-up cycle to about 20 sec.
To set the copier into the Energy Saver mode, you
need only to press the Energy Saver key. Or, a
given period of time after the copier has been
touched last, it automatically enters the Energy
Saver mode. The initial setting is 15 min.
To cancel the Energy Saver mode, press any key
on the control panel.
NOTE
The copier is automatically shut down if the
Auto Shut OFF function is activated while it is
in the Energy Saver mode.
Useful Tip
The time for the copier to enter the Energy
Saver mode can be selected from 1 to 240 min.
For details, see User's Choice. ☞p. 4-18
Panel Resetting
Auto Panel Reset
Auto Copy Start
Auto Shut OFF
Energy Saver