Filter
Top Products
5-10
Chapter 5
When a Message Appears
4. When the Message “A paper misfeed has been detected.” Appears
Misfeed Location Displays
Different procedures are used to clear a misfed sheet of paper depending on the location. First, isolate the
location, then clear the misfeed according to the procedure applicable to the misfeed occurring at that
particular location. A blinking dot “” indicates that there is a misfeed at that location. A lit dot “”
indicates that there might be a sheet of paper stopped at that location.
Copier p. 5-12
Duplex Unit p. 5-14
Electronic Document Handler p. 5-16
If a paper misfeed occurs during a copy cycle, the
message shown on the left appears and that
particular copy cycle is stopped in the middle of
operation.
Clear the misfed sheet of paper according to the
procedure given below.
1155O632CA
1155O456AA 1155O457AA 1155O458AA 1155O459AA 1155O460AA
1155O459AA1155O462AA1155O461AA
1155O463AA 1155O464AA
1155O465AA