Filter
Top Products
3-7
2. Placing the Original
Chapter 3
Making Copies
<“Book” refers to an open bound original>
Place the open book so that its top edge is at
the rear of the copier and the center of the
book is aligned with the Book Marker
indicated on the Original Length Scale.
Gently lower the Document Handler.
NOTES
• If the book is thick, make a copy with the
document handler raised.
• Not positioning the open book properly will
result in copies with pages in incorrect order.
• Do not look directly at the Original Glass
surface as a strong beam of light is emitted.
NOTES
• Be sure to raise the document handler 15° or
more before placing the original. If the
document handler is raised to an angle less
than 15°, the copier may fail to select the
correct copy paper size or zoom ratio.
• Do not place an original weighing more than
3kg on the Original Glass.
• When placing an open book, do not press the
book hard on the Original Glass, as trouble
could result.
Making Copies from a Book Using
Book Copy Mode
1
1155O027AA
1155O697AA
Book Maker
Original Length Scale
2
1155O028AA
15°