Filter
Top Products
4-18
5. User’s Choice
Chapter 4
Using the Utility Mode
Select whether to turn “ON” or “OFF” the beep
that sounds each time a key on the Touch Panel is
touched.
The initial setting is “ON.”
Select the default paper size detection for the
Universal Tray, either Auto Detect or Custom Size.
The initial setting is “Auto Detect.”
Designate a drawer for special paper.
The initial setting is “Normal” for all drawers.
See p. 3-10 for Special Paper Setting.
Select the time it takes the auto panel reset
function to be activated from among “30 seconds,”
“1 min.,” “2 min.,” “3 min.,” or “5 min.,” or not
activate the function at all (“No Reset”).
The initial setting is “1 min.”
Set the time it takes the copier to enter the Energy
Saver mode, from 1 min. ~ 240 min. (in 1 min.
increments).
The initial setting is “15 min.”
Select whether to reset the panel (“ON”) or not
(“OFF”) when the Plug-In Counter is pulled out of
the copier or a magnetic card is pulled out of the
Data Controller.
The initial setting is “ON.”
Select the time it takes the Auto Shut Off function
to be activated, from 15 min. ~ 240 min. in 1 min.
increments. Auto Shut Off shuts down the copier a
given period of time after the last operation.
The initial setting is 90 min.
*A setting is also possible to disable Auto Shut
Off.
4/6
Confirmation Beep
5/6
Universal Tray
Special Paper
Auto Panel Reset
Energy Save Mode
Plug-In Counter Reset
Auto Shut Off