Filter
Top Products
12 - 4
The image scanner won’t read your bar code at all.
1. Scan the sample bar codes in the back of this manual. If the image scanner
reads the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see Chapter 6).
2. If the image scanner still can’t read the sample bar codes, scan All
Symbologies on page 6-1.
If you aren’t sure what programming options have been set in the base, or if you
want the factory default settings restored, scan Resetting the Standard Product
Default Settings: Current Application Work Group on page 10-4.
Troubleshooting the Cordless System
The image scanner must be linked to the base for the system to work properly.
See "Linking Image Scanner to Base" on page 1-5.