Filter
Top Products
2 - 14
Wand Emulation
Wand Emulation Connection
The Wand Emulation Connection bar codes should be used if you want to
change the terminal ID
only
, without changing any other image scanner set-
tings. We recommend using Wand Emulation Plug & Play bar codes to pro-
gram your image scanner to emulate a wand reader. The Wand Emulation Plug
& Play bar codes change other parameters, in addition to changing the terminal
ID. Please refer to Wand Emulation Plug & Play on page 1-22 for further infor-
mation.
In Wand Emulation mode, the image scanner decodes the bar code then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5
without any changes, but converts all other symbologies to Code 39. 2D sym-
bologies are converted to Code 128.
The
Code 39 Format
bar code below sets the terminal ID to 61, and the
Same
Code Format
bar code sets the terminal ID to 64.
Code 39 Format
Same Code Format