Honeywell 2020 Barcode Reader User Manual


 
1 - 1
1
Getting Started
About This Manual
This manual contains information to help you set up, operate, and program the
cordless system. Product specifications, connector pinouts, a troubleshooting
guide, and customer support information are also provided.
Honeywell bar code image scanners are factory programmed for the most com-
mon terminal and communications settings. If you need to change these set-
tings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
This section contains the following information:
Unpacking the System
Cordless System Main Components
Battery and Charging Information
Linking the Image Scanner to the Base
Beeper and LED Sequences and Their Meaning
Basic Operation of the Cordless System
Communication Between the Cordless System and the Host
Connection of the Base to an Interface
Unpacking the System
After you open the shipping carton containing the product, take the following
steps:
Check to make sure everything you ordered is present.
Save the shipping container for later storage or shipping.
Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
Models
Models Description
2020-5BE Cordless Base that supports the following interfaces:
Keyboard wedge, TTL level 232, TTL level 232 serial
wedge, IBM 4683, wand emulation, USB keyboard, USB
HID, USB retail (IBM SurePOS)
2020-CBE Charge-Only Base
3820SR0C0BE Cordless Linear Image Scanner
3820iSE Industrial Cordless Linear Image Scanner