Filter
Top Products
9 - 2
Temporary Visual Xpress Configuration
For quick download communication configuration, scan the Visual Xpress bar
code to temporarily configure the imager for Visual Xpress settings. Refer to
Visual Xpress on page 10-1 for additional information about Visual Xpress.
Note: Connect the imager using RS-232 cables. Scan the bar code below and
the unit will communicate in RS-232 mode, allowing it to work with Visual
Xpress. The imager reverts to the original or reprogrammed interface
when the power is cycled.
If you download new software into a unit, the user-programmed parameters are
retained. If you need to discard user-programmed settings, scan the Standard
Product Default Settings bar code
(see Resetting the Standard Product
Defaults on page 9-1).
Visual Xpress