Filter
Top Products
7 - 19
UPC-E
<Default All UPC-E Settings>
UPC-E0 and UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use the
UPC-E0 selection. If you need to read codes that lead with the 1 number sys
-
tem, use the UPC-E1 selection.
Default = Off (UPC-E0) and Off (UPC-E1).
UPC-E0 and UPC-E1 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 and UPC-E1 Addenda Required
When Addenda Required is set to on, the scanner will only read UPC-E bar
codes that have addenda.
Default = Not Required.
UPC-E0 On
* UPC-E0 Off
UPC-E1 On
* UPC-E1 Off
* Off
On
* Not Required
Required