Filter
Top Products
2 - 13
Wand Emulation
Note: Changing primary wand emulation settings also changes the secondary
wand emulation settings
(see Secondary Code 39 Wand Emulation on
page 6-2).
Data Block Size
Note: This option is not applicable to Laser Emulation Raw Output (see
Secondary Laser Emulation on page 6-3).
This transmits the data in smaller blocks to prevent buffer overflow.
Default =
40.
Delay Between Blocks
Note: This option is not applicable to Laser Emulation Raw Output (see
Secondary Laser Emulation on page 6-3).
This sets the delay time between data blocks.
Default = 50ms.
Overall Checksum
Note: This option is not applicable to Laser Emulation Raw Output (see
Secondary Laser Emulation on page 6-3).
20
80
* 40
60
5ms
500ms
* 50ms
150ms