Filter
Top Products
10 - 6
Bottom Panel
Mounting
The charger should be on a dry, stable surface. To easily adapt the charger to your environment, it can
be mounted on a flat, horizontal surface such as a desktop or workbench, or a flat, vertical surface such
as a wall.
When choosing a location, always bear in mind that
• the mounting location must allow users easy access to power switch and power connector.
• the charger should be oriented so that users can easily insert and remove battery packs and read the
labels, especially for the Battery Analyzer.
Using the DIN Rail
Most Dolphin peripherals have a DIN Rail (7.5 mm high X 35 mm wide) slot on the bottom panel to enable
secure mounting.
To mount the charger, you slide the DIN Rail into the slot on the bottom panel. Then, using the appropriate
nuts and bolts, secure the DIN rail to the desk or wall.
DIN Rail
Slot