Humminbird 531906-1EN_A Switch User Manual


 
NOTE: The Shared and Local menu options may change to accommodate new product
features.
Select a Sonar Source
When you first set up the network, the control head will automatically start
Normal operation with the transducer that is connected to it. Use the
instructions below to choose a different local sonar source or shared source for
your control head.
Select a Sonar Source
1. Open the Network Source Setup dialog box.
2. Press the RIGHT Cursor key until the Sonar tab is selected.
3. Scroll: Press the DOWN or UP Cursor keys. The selected source is
highlighted in white.
NOTE: If you do not see a connected transducer in the list, make sure that the control
head Transducer Select menu option is set to the correct transducer. Go to the
Main Menu > Navigation Menu Tab > Transducer Select.
Local Sonar Menu Settings
83 kHz Sensitivity
455 kHz Sensitivity
Bottom Lock
Bottom Range
Bottom View
Chart Speed
Depth Lines
Quad Layout
RTS Window
Sensitivity (Down)
SI Colors
SI Enhance
SI Sensitivity
SI Side
Sonar Colors
Ping Rate
SI Range
SwitchFire™
Transducer Select
Upper Range
Water Type
14
Sonar Sources