Humminbird 531906-1EN_A Switch User Manual


 
Select Temperature Sources for Digital Readout Boxes
1. Open the Network Source Setup dialog box.
2. Select the tab for T1, T2, T3, or T4: Press the RIGHT or LEFT Cursor
keys. Each tab represents a digital readout position on the screen.
NOTE: The temperature readout positions may vary with the Humminbird® model. See
the Views section and Select Readouts section of your Humminbird® Operations Manual
for more information.
3. Scroll: Press the DOWN or UP Cursor keys. The selected source is
highlighted in white.
4. Select: Press the ENTER/INFO key or the RIGHT Cursor key. The check
mark indicates that the source is being used by the control head.
5. Repeat steps 2 - 4 to select a different temperature tab.
Temperature Digital Readouts
1100 Series
The Temperature Digital Readout positions correspond
with the T1, T2, T3, and T4 tabs in the Network Source
Setup dialog box.
20
Temperature Sources