Humminbird 531906-1EN_A Switch User Manual


 
Change the Temperature Source
To change the temperature source after the network has been configured,
open the Network Source Setup dialog box to change the temperature sources
at any time (see Select a Temperature Source). Network settings are saved
even after the unit is powered off.
Temperature Graph: When the temperature source is changed, the
temperature graph displays a red mark to show where the temperature
source was changed.
NOTE: The Temperature Graph menu setting is not shared on the network. It is a
local menu setting.
If the control head cannot detect the set temperature source, the
digital readout box will be empty. Open the Network Source Setup
dialog box to assign a temperature source to the digital readout box.
See Select a Temperature Source for details.
Temperature Graph
1100 Series
Red marks
indicate where
the temperature
source changed.
22
Temperature Sources