Humminbird 531906-1EN_A Switch User Manual


 
Share Navigation Data
To synchronize navigation, navigation alarms, and review your saved
waypoints, routes, and tracks on the network, turn on Share Navigation Data
on each control head. You can then observe the following:
When navigation is started on one control head, navigation will also
start on the other control head.
When a waypoint is marked on one control head, the waypoint will
also be displayed on the other control head. If the waypoint is saved, it
will be saved to the local control head where it was marked.
Navigation Alarms will sound or display on the networked control
heads. To turn off a shared alarm, press the EXIT key on either control
head.
When Man Overboard (MOB) Navigation is started on one control
head, the MOB waypoint and navigation data will be displayed on both
control heads. See Share Man Overboard (MOB) Navigation.
NOTE: To manage your saved waypoints, routes, and tracks, see the Waypoint
Management section of your Humminbird® operations manual or contact our Customer
Resource Center for the Waypoint Management Guide at 1-800-633-1468 or visit our
Web site at humminbird.com.
NOTE: Although the navigation data is viewable, it is not copied on every control
head. In other words, a new route will be saved to the control head where the
route was initiated. If you edit navigation data, the data will be saved back to its
local control head.
28
Sharing Navigation Data