Filter
Top Products
5-12 CHAPTER 5: INSTALLING NETWORK DRIVERS
Disabling RPL
To disable RPL:
1 Boot your PC under DOS.
2 Make sure that the backup copy of the TokenDisk diskette
is in a floppy drive on your PC.
3 At the diskette prompt, type:
3TOKDIAG [Enter]
4 From the Install pull-down menu, select Configure Adapter.
5 Using the arrow keys, move to Boot PROM.
6 Press [Enter] and select Disable.
7 Press [Enter].
8 Select OK and press [Enter] to save the setting.
9 Remove the diskette from the drive and reboot the PC.
This completes the description of how to use RPL with the
3C619C adapter.