Filter
Top Products
Messages C-3
The adapter’s BIOS/MMIO base address is in conflict with
another device installed in the system. To run diagnostic tests,
you must reconfigure the adapter to another BIOS/MMIO base
address.
The BIOS/MMIO domain conflicts with the Shared RAM
domain. Select another memory segment for either the
Shared RAM or BIOS/MMIO domain.
The Configuration and Diagnostic Program supports up to six
ISA adapters installed in the PC; more than six were detected.
Remove the extra adapters before using this program.
The Interrupt Request Level xxxx is not supported by IBM
mode. Change the Interrupt Request Level to either 2 (9), 3,
6, or 7.
The I/O Base Address xxxx is not supported by IBM mode.
Change the I/O Base Address to either A20 or A24.
The selected BIOS/MMIO memory segment is being used by
another device or software program installed in the PC. Do you
want to save the configuration anyway?
The selected interrupt request level is being used by another
device installed in the PC. Do you want to save the
configuration anyway?
The selected I/O base address is being used by another
device installed in the PC. Do you want to save the
configuration anyway?
The selected shared RAM memory segment is being used by
another device or software program installed in the PC. Do you
want to save the configuration anyway?
The Shared RAM Base Address is not set to a correct address
boundary. Please set it to a value in increments of the RAM
Page Size setting.