Filter
Top Products
3-10 CHAPTER 3: INSTALLING THE NETWORK DRIVER
7 Insert EtherDisk Diskette #2 in drive A and click OK.
8 In the Select OEM Option box, select
3Com EtherLink XL PCI Adapter (3C905B).
9 Click OK.
The Bus Location window appears.
10 Click OK.
Windows NT copies the files from EtherDisk Diskette #2.
If you are prompted for network information, contact your
MIS department for the requested information.
11 In the Network Settings Change window, click OK.
Windows NT completes the installation.
12 Click Restart to restart your PC.
If you have problems, see Appendix B for troubleshooting
information.
NetWare for Windows 3.1x, Windows for Workgroups,
and DOS
The AutoLink program installs DOS client software and
drivers for Novell NetWare in Windows 3.1x, Windows for
Workgroups 3.11, and DOS environments.
CAUTION: Do not use the AutoLink program if you are
running Windows 95, Windows 98, or Windows NT.
The AutoLink program modifies the CONFIG.SYS and
AUTOEXEC.BAT files. It logs on to the server and updates
the client software if your MIS department has already
configured a 3Install account on your server.
AutoLink Requirements
To use the AutoLink program, your computer should have
only one 3C905B-TX adapter installed and have 1 MB of
free hard disk space.