Filter
Top Products
B-6 APPENDIX B: TECHNICAL SUPPORT
3Com NIC Diagnostics Program
Use the 3Com NIC Diagnostics program for Windows 95
and Windows NT to test the 3C905B-TX adapter and
change configuration. To change the adapter’s
configuration, see Chapter 4. If you are running NetWare
Client 32 with the NetWare ODI driver, use the DOS
diagnostic program described in the INSTRUCT.TXT file in
the HELP directory on EtherDisk Diskette #1.
The 3Com NIC Diagnostics program is installed with the
driver. Driver installation is described in Chapter 3. You
must install the driver before you run the program.
Accessing the 3C905B-TX Adapter Help System
You can display the 3C905B-TX adapter Help system,
a Windows Help application that includes 3C905B-TX
adapter Release Notes, Frequently Asked Questions, and
the 3C905B-TX adapter KnowledgeBase. The Help system
was installed with the network driver.
To display the 3Com Help system, follow these steps:
1 Install the 3C905B-TX adapter, connect it to the
network (Chapter 2), and install the driver
(Chapter 3).
2 Click the Windows Start menu.
3 Select Programs.
4 Select 3Com NIC Utilities.
5 Select 3Com NIC Diagnostics Help.
The Help screen for the 3Com NIC Diagnostics General
screen appears.
6 Click the links to display information about each of
the 3Com NIC Diagnostics screens.