Filter
Top Products
2030—Media Console
Disconnect the cables from the back of the Media Console.
Remove the back cover.
Disconnect the two signal, two power, CD/DVD, and LED cables.
Pry off the left and right side wings.
Open the Media Console.
Remove the left and right side latch retainers.
Pry the left and right side latches and pull the console up to a vertical
position.
Pull the console up to remove.
Remove the 13 bottom cover screws to remove console components.
When installing the console, be sure the console spring is installed and
latched on the plastic retainer.
Figure 4-3. Console back cover removal
Repair Information 4-7