– 8 MB, 16 MB, 32 MB, 64 MB or 128 MB DIMM modules.
– 60 ns Gold SDRAM
Maximum system board memory is 384 MB.
See Appendix B, “Model/Monitor Configurations and FRU Part
Numbers” on page B-1 for memory configuration. Refer to “System
Memory” on page 1-27.
Ports: parallel, serial, mouse, keyboard, USB(two), video, MIDI/Joystick,
audio out/in/mic.
Connectors for:
– PCI/ISA adapter cards
– VESA Video Feature Bus (2x13 un-shrouded header)
1
– Internal VGA display (2x7 shrouded header)
– Input power (12-pin)
– AT diskette drives (34-pin)
– Two 40-pin IDE drive controllers: a primary local bus IDE that
supports two hard disk drives and a secondary IDE that supports a
CD/DVD-ROM drive and one hard disk drive, or two hard disk
drives.
– Power light-emitting diode (LED)/hard disk LED (4-pin)
Power-on switch 2-wire connector and a power supply auxiliary control
3-wire connector for Power Management features.
Lithium battery.
1
See “VESA Local Bus Note” on page 1-6.
General Information
1-7