Filter
Top Products
The steps in the following tables always start at the Configuration/Setup
Utility program main menu.
Table 3 (Page 1 of 4). Network-related settings
To configure: Select: Comments:
Remote
Administration
1. System Security
2. Remote Administration
3. Enabled or Disabled
Enable Remote
Administration to allow
POST/BIOS updates over
the LAN.
Ethernet
adapter
1. Start options
2. Network Setup
3. Network boot F12
option
4. Enabled or Disabled
Automatic
Power On
Startup
Sequence
1. Start Options
2. Startup Sequence
3. Automatic Power On
Startup Sequence
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Select the first, second,
third, and fourth
startup devices.
You might not be able to
select four startup devices
for your model.
Wake on LAN 1. Power Management
2. Automatic Power On
3. PCI Wake Up and
press Enter.
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
You might not be able to
select four startup devices
for your model.
16 Type 6344 User Guide Update