IBM 2197 Personal Computer User Manual


 
7-4
IBM Personal Computer User Guide
Resolving resource conflicts
Using Setup
Your computer's Basic Input/Output System (BIOS) automatically detects most
hardware changes and then updates the related CMOS configuration settings in
Setup. In cases when the CMOS settings are not automatically updated, you
receive a message reminding you to manually update the settings.
To resolve resource conflicts between system devices in Setup, follow these steps:
1. Enter Setup. See Entering Setup on page 6-4 for instructions.
2. From the Configuration/Setup Utility menu, select
PnP/PCI Option
.
3. Highlight the
Reset configuration Data
parameter and set it to
Enabled
to
clear the resource assignments of all installed cards.
After the above steps, proceed to the next section on how to use the Windows 98
Device Manager to assign system resources to your hardware devices.
Using the Windows 98 Device Manager
Use the Windows 98 Device Manager to verify system device settings or to resolve
system resource conflicts, such as those that might occur with Interrupt Requests
(IRQ) and Direct Memory Access (DMA) resources.
Follow these steps to start the Device Manager and change device settings:
1. From the Windows 98 desktop, double-click on the
My Computer
icon.
2. In the My Computer window, double-click on the
Control Panel
icon.
3. In the Control Panel window, double-click on the
System
icon.
4. In the System Properties window, click on the
Device Manager
tab.
5. Select a device item, then click on the
Properties
button. A display box
appears showing the properties of the device.
6. Make the necessary changes in the settings that will not conflict with other
devices.
7. Click on
OK
.