Filter
Top Products
16 IBM Desktop System HMM
Save & Exit Settings
After changing any parameter in the Setup
Configuration setting, return to Configuration/Setup
Utility main menu and select Save & Exit Setup to
save all the settings you have changed. Then, exit the
Configuration/Setup Utility menu.
Loading Default Settings
The computer is already configured for use. The
original configuration settings, also called factory or
default settings, are stored in the CMOS. Setup
includes an option Load Default Settings that lets you
reload the original configuration at any time.
To load the default settings, follow these steps:
1. Use down-arrow key to select load default settings.
A dialog box appears confirming if you want to
load the default settings.
2. Use the left-arrow key to select Yes, then press
Enter
.
3. Press
Esc
to exit Setup.
A dialog box appears confirming if you want to
save the settings (in this case, the default settings
that you reloaded).
4. Use the left-arrow key to select Yes, then press
Enter
to save the changes in Configuration/Setup
Utility.
You must load the Setup default settings in the
following instances:
•
When you replace the system battery.
•
When you customize the system configuration
settings and some resource assignments conflict
causing the computer to stop responding.