Filter
Top Products
General Information 21
Keyboardless Operation
When enabled, the BIOS issues the seek command
to the keyboard to move faster during POST. The
default is enabled.
Power On Self Test
When set to Enabled, which is the default, this
parameter allows the system to boot faster by
skipping some power-on self-test (POST) routines.
Date and Time
From the Configuration/Setup Utility main menu,
select the Date and Time option to view or change the
system clock from the Date and Time menu. If you
want to change the system date, enter the date in the
format shown on the screen.
If you change the time, enter the time in 24-hour
format (hours, minutes, seconds). For example:
- 12 midnight is 00:00:00
- 12 noon is 12:00:00
- 1 p.m. is 13:00:00
When setting date and time, press the
up-
or
down-
arrow key
to highlight a field. The date and time are
saved as you type it.
Power-On password
Select this parameter and press the
down arrow key
to display the Power-on Password window. In this
window, you can set up a password to restrict the use
of your computer. You can also change or remove the
password.
If you set up a power-on password, you must type this
password each time you turn on your computer. If you
do not key in the correct password, you cannot use
your computer. You must also type this password if
you want to enter Setup.
Setting a Power-On Password
1. Press
F1
to enter Configuration/Setup Utility.
2. From the Configuration/Setup Utility main menu,
select System Security and then [Power-On
Password].
3. Highlight the [Power-On Password] parameter and
press the
Enter
key to display the Power-On