Filter
Top Products
3. Insert the Ethernet PC Card into an available PC Card slot in your mobile
computer, as shown in the following illustration.
If you are unsure about the location of the PC Card slot, refer to your
mobile computer documentation.
Installing the Ethernet PC Card adapter device drivers in a
mobile computer
If your previous computer is running Windows XP, Windows 2000, Windows
Me, or Windows 98 SE, the Ethernet PC Card will automatically be recognized,
and the device drivers will be installed when you start the operating system. If
prompted, restart the computer. Proceed to “Connecting the computers” on
page 1-11.
Note: The New Network Device Installed window might open (Windows XP
only). Close this window.
If your previous computer is running Windows 98 or Windows 95, follow the
instructions for your operating system.
Windows 98
Follow this procedure to install the Ethernet PC Card adapter device drivers in
Windows 98:
1. If it is not already running, start Windows 98. The Add New Hardware
wizard window opens.
2. Insert the IBM Data Migration User’s Guide and Software CD in the CD-ROM
drive if it is not already inserted. If a browser window automatically opens,
close the window.
3. Click Next.
4. Click Search for the best driver, then click Next.
5. Click CD-ROM drive, then click Next.
1-10 IBM Data Migration Kit: User’s Guide