Filter
Top Products
2. Press the two side rail tabs and push the HD from the bottom. Pull the
HD out.
3. When replacing the drive cage into its horizontal position, be sure place
the cage latch back to its regular horizontal position. This is necessary so
that the machine cover will fit properly.
Power supply removal
1. Remove the four screws that hold the power supply to the back of the
chassis.
2. The power supply is attached to the base of the chassis by a latch on the
front. Slide the power supply forward to dislatch if from the chassis.
144 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649