Filter
Top Products
Diagnostic Error Code FRU/Action
005-199-XXXVideo test failed, cause unknown
1. Go to the ″Undetermined problems″ section
2. Flash the system and re-test
3. Replace component under function test
005-2XX-XXX
005-3XX-XXXVideo subsystem error
1. Video card, if installed
2. System board
006-000-XXXDiskette interface Test Passed
1. No action
006-0XX-XXXDiskette interface error
1. Diskette drive Cable
2. Diskette drive
3. System board
006-195-XXXDiskette interface Test aborted by
user
1. Information
2. Re-start the test, if necessary
006-196-XXXDiskette interface test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
006-197-XXXDiskette interface test warning
1. If a component is called out, make sure it is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
006-198-XXXDiskette interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3. Go to the ″Undetermined problems″ section
006-199-XXXDiskette interface test failed, cause
unknown
1. Go to the ″Undetermined problems″ section
2. Flash the system and re-test
3. Replace component under function test
006-25X-XXXDiskette interface Error
1. Diskette drive cable
2. Diskette drive
3. System board
011-000-XXXSerial port Interface Test Passed
1. No action
011-001-XXXSerial port Presence
1. Remove external serial device, if present
2. Run setup, enable port
3. System board
011-002-XXX
011-003-XXXSerial port Timeout/Parity error
1. System board
Chapter 1. IBM PC Enhanced Diagnostics error codes 7