IBM 6648 Personal Computer User Manual


 
Diagnostic Error Code FRU/Action
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error
1. Run Setup
2. Flash the system
3. System board
071-03X-XXXAudio port failure
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
071-04X-XXXAudio port failure
1. Run Setup
2. Audio card, if installed
3. System board
071-195-XXXAudio port Test aborted by user
1. Information
2. Re-start the test, if necessary
071-196-XXXAudio port test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
071-197-XXXAudio port test warning
1. Make sure the component that is called out is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
071-198-XXXAudio port test aborted
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3. Go to the Undetermined problems section
071-199-XXXAudio port test failed, cause
unknown
1. Go to the Undetermined problems section
2. Flash the system and re-test
3. Replace component under function test
071-25X-XXXAudio port failure
1. Speakers
2. Audio card, if installed
3. System board
080-000-XXXGame Port interface Test Passed
1. No action
080-XXX-XXXGame Port interface Error
1. Remove the game port device and re-test the
system
080-195-XXXGame Port interface Test aborted
by user
1. Information
2. Re-start the test, if necessary
Chapter 1. IBM PC Enhanced Diagnostics error codes 15