IBM 6648 Personal Computer User Manual


 
Diagnostic Error Code FRU/Action
001-279-XXXSystem IRQ12 failure
1. Device on IRQ12
2. System board
001-280-XXXSystem IRQ13 failure
1. Device on IRQ13
2. System board
001-281-XXXSystem IRQ14(hard disk drive)
failure
1. Hard disk drive cable
2. Hard disk drive
3. System board
001-282-XXXSystem IRQ15 failure
1. Device on IRQ15
2. System board
001-286-XXX
001-287-XXX
001-288-XXXSystem Timer failure
1. System board
001-292-XXXSystem CMOS RAM error
1. Run Setup and re-test
2. System board
001-293-XXXSystem CMOS Battery
1. Battery
2. System board
001-298-XXXSystem RTC date/time update
failure
1. Flash the system
2. System board
001-299-XXXSystem RTC periodic interrupt
failure
1. System board
001-300-XXXSystem RTC Alarm failure
1. System board
001-301-XXXSystem RTC Century byte error
1. Flash the system
2. System board
005-000-XXXVideo Test Passed
1. No action
005-00X-XXXVideo error
1. Video card, if installed
2. System board
005-010-XXX
005-011-XXX
005-012-XXX
005-013-XXXVideo Signal failure
1. Video card, if installed
2. System board
005-016-XXXVideo Simple Pattern test failure
1. Video Ram
2. Video card, if installed
3. System board
Chapter 1. IBM PC Enhanced Diagnostics error codes 5