Filter
Top Products
CAUTION:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these parts,
contact a service technician.
AC
DC
AC
DC
Locking handle
(open)
Locking latch
Power supply 2 (PS2)
Power supply 1 (PS1)
DC power
LED (green)
AC power
LED (green)
AC
DC
To remove a hot-swap power supply, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 21.
Attention: Static electricity that is released to internal server components
when the server is powered-on might cause the server to halt, which could
result in the loss of data. To avoid this potential problem, always use an
electrostatic-discharge wrist strap or other grounding system when working
inside the server with the power on.
2. Remove the server cover. See “Removing the cover and bezel” on page 23.
Chapter 2. Installing options 25