Filter
Top Products
DASD 2-Pack Assembly
Removal
1. Remove the cover as described in “Removing the Cover” on page 7-3.
2. Remove the disk drive cover, as described in “Front Covers” on page 7-17.
3. Remove the disk drives, as described in “Internal Disk Drives” on page 7-24.
4. Remove the four screws that attach the DASD 2-Pack assembly to the front of
server.
5. Use a screwdriver with an extended shaft to remove the screws at the internal
upper-left and lower-right corners that attach the back of the DASD 2-Pack
assembly to the chassis.
6. Slide the the DASD 2-Pack assembly forward and lift it out of the server.
Replacement
Replace in reverse order.
7-6 7046 Model B50 Service Guide