Filter
Top Products
Compilers for MQSeries Applications on HP-UX Clients
The following compilers are supported:
v Micro Focus COBOL for UNIX, Version 4.0
v HP-UX ANSI C compiler
v C Softbench, Version 5.0
v HP CFRONT C++, Version 3.1
v IBM C and C++ compilers, Version 3.6
v HP ANSI C++
Components for HP-UX
These are identical to those for AIX. See “Components for AIX” on page 46.
OS/2 Warp Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for OS/2 Warp.
Hardware
An MQSeries client can run on OS/2 Warp, on a personal computer. There
must be enough random access memory (RAM) and disk storage for the
programming prerequisites (below), the MQSeries client, the access methods,
and the application programs.
The system unit must have a CD-ROM device.
Software
The following are prerequisites for MQSeries applications running an OS/2
Warp client.
This is the minimum supported software level. Later levels, if any, will be
supported unless otherwise stated.
v OS/2 Warp, Version 4.0 (84H1426) (5622-851)
v OS/2 Warp Server, Version 4.0 (25H8002)
v OS/2 Warp Server Advanced SMP feature, Version 4.0
v OS/2 Workspace-on-Demand
Connectivity
v IBM eNetwork Communications Server for OS/2 Warp, Version 5.0
v Novell Netware Client for OS/2 Warp, Version 1.20 (for direct IPX/SPX
support)
v IntraNetWare Client for OS/2 Warp, Version 2.12
v TCP/IP for OS/2 Warp, Version 2.0 base kit plus NetBIOS kit, Version 3.5
(base kit is essential)
v NetWare for OS/2 Warp, Version 4.11
Hardware and Software, HP-UX
50
MQSeries for AS/400, V5.1 Quick Beginnings