Filter
Top Products
5. Edit the autoexec.bat file using a suitable editor. If the PATH statement
exists, add the following to it:
c:\mqmdos;c:\mqmdos\bin;c:\mqmdos\en_us
If the PATH statement does not exist, add the following line to the
autoexec.bat file.
SET PATH=c:\mqmdos;c:\mqmdos\bin;c:\mqmdos\en_us
Removing an MQSeries Client from DOS
Delete all the files in the directory where you installed the MQSeries client,
and then remove the directory.
Installing on HP-UX
To install an MQSeries client on an HP-UX system you use the MQSeries
Client CD-ROM supplied as part of the MQSeries product.
Note: If you plan to install an MQSeries client and server on the same
machine, see “Installing MQSeries Clients on the Same Machine as the
Server” on page 57.
The MQSeries client is installed into the /opt/mqm directory. This cannot be
changed.
Before Installation
Before you can install an MQSeries client on your HP-UX system you:
v Must create a group with the name mqm.
v Must create a user ID with the name mqm.
v Are recommended to create and mount a /var/mqm file system, or /var/mqm,
/var/mqm/log, and /var/mqm/errors file systems.
If you create separate partitions, the following directories must be on a local
file system:
– /var/mqm
– /var/mqm/log
You can choose to NFS mount the /var/mqm/errors and /var/mqm/trace
directories to conserve space on your local system.
After installation, this user ID (mqm) owns the directories and files that
contain the resources associated with the product. This group and user must
be defined for any machine on which the MQSeries software is to be installed,
whether the machine is a client or a server machine.
Installing on DOS
Chapter 7. Installing MQSeries Clients 65