Filter
Top Products
Use the push buttons as necessary:
v To display descriptions of the selected options, select Descriptions.
v To select all of the options, select Select all.
v To deselect all of the options, select Deselect all.
The Work and File Directory field allows you to specify a drive and
directory other than the default for the installation files (File directory)
and for the working files that might be created when you use the
MQSeries client (Working directory).
Select a drive from the list box if required. When you return to the
Install - directories panel, your selected drive is shown. Select the OK
push button to return to the Install - directories panel.
9. Select the Install push button to continue. The Install-progress panel is
displayed. This panel shows:
v The file currently being installed (source) and the drive and directory
to which it is being installed (target).
v A progress bar, indicating the percentage of files already unpacked and
installed.
v The elapsed time.
v The status; for example, unpacking, processing, or transferring.
If you select the Stop push button, you are asked whether you want to
delete the partial system you have installed. Select Yes to delete the files
already installed and return to the introductory panel. Select Start install
from the File menu to start the installation again.
10. A cyclic redundancy check (CRC) is performed on the installed software
and any errors are written to a log file. This is the file specified by the
/L1 parameter of the INSTALL command by default. If /L1 is not
specified, the log file is MQMERR.LOG in the high-level directory chosen
for installation.
Note: The log files must be on a local drive. If the product has been
installed on a remote drive, change the path of the log files in the
mqs.ini file.
11. When installation is complete, the Installation and Maintenance panel is
displayed. Select OK. The introductory MQSeries for OS/2 panel is then
displayed. Leave the installation program by selecting the Exit push
button.
12. When the installation process is complete, a folder is created on the OS/2
Warp desktop, containing objects as follows:
READ.ME
MQSeries Installation and Maintenance
MQSeries Information
Installing on OS/2 Warp
68
MQSeries for AS/400, V5.1 Quick Beginnings