Filter
Top Products
command, you must type it as one continuous line. In the example above,
for clarity, the command is spread over several lines.
In this example, the MQSeries client is installed from the redirected drive J: on
the server, according to the options supplied in the response file
AMQISMC2.RSP. Note that drive J: must be a writeable drive that you must
create, and the .RSP file must be put on that drive. The installation log files
will also be created on the J: drive. The response file specifies the drive and
directory in which to install the client. Errors are logged in MQM.OUT and
the history log is contained in MQM.HIS. The /X parameter specifies that the
installation is non-interactive.
The example also shows that you must have the INSTALL.EXE available to
your system. This file is supplied on the client CD-ROM, but is not installed
onto your system. You must make a copy of this file available when you
perform maintenance updates on your system.
Installation and Maintenance Parameters
The installation and maintenance parameters are as follows:
Note: You can enter the parameters in any order. Equals signs (=) can be used
instead of colons (:) in the parameters. Values can be upper or lower
case.
/A:action
Specifies the action to be performed by the installation program. If you
specify this parameter, the main window of the installation program is not
displayed. Valid values for action are:
D Delete an installed MQSeries for OS/2 Warp system
I Install a new MQSeries for OS/2 Warp system
R Restore a backed up MQSeries for OS/2 Warp system
U Update an installed MQSeries for OS/2 Warp system
Note: The installation program is not supplied with a corrective service
medium. Therefore, if you are updating, restoring, or deleting an
MQSeries for OS/2 Warp system, you must have access to the
installation program used to install it.
INSTALL /A:action
/G:include path
/L1:error log
/L2:history log
/R:response file
/S:source location
/T:install target directory
/TU:update CONFIG.SYS directory
/X
Installing on OS/2 Warp
Chapter 7. Installing MQSeries Clients 71