Filter
Top Products
CHAPTER 6 STAND-ALONE FUNCTION
User's Manual U13502EJ2V0UM00
68
6.2 OPERATION
The PG-FP3 can execute the E.P.V., ERASE, PROGRAM, VERIFY, and PROM Load commands in the stand-alone
mode. For processing and using the commands, see
Chapter 5
.
In standalone mode, it is not necessary to connect to a host. However, a parameter file must be loaded from the
host and TYPE setting must be performed by the host in advance.
•
Selecting the command mode
When power is turned on, E.P.V. mode is set. The mode changes as follows each time the MODE key is
pressed:
E.P.V.
→
ERASE
→
PROGRAM
→
VERIFY
→
LOAD
→
E.P.V.
…
Photo 6-1. Selecting the Command Mode
E.P.V. command mode
VERIFY command mode
ERASE command mode
PROM LOAD command mode
PROGRAM command mode
•
Executing a command
To execute the currently selected command, press the ENTER key. While the command is being executed, an
LED indicating the mode blinks.