Filter
Top Products
8. Click Next on Driver Files Search Results.
9. If The Digital Signature Not Found window opens, click Yes to continue.
10. When installation of the PCI Ethernet Controller completes, click Finish.
11. Click Start→Run.
12. Type x:\modem\win2K\setup.exe where x is the drive letter of the
CD-ROM drive.
13. Click OK on Do you want to install the modem driver?
14. If the Digital Signature Not Found window opens, click Yes to continue.
The Lucent Win Modem driver will complete loading.
Installing the Ethernet and modem device drivers in
Windows 98
To install the PCI Ethernet Controller device driver and the Lucent Win
Modem device driver in Windows 98, do the following:
1. Start Windows 98. The Add New Hardware Wizard window opens for the
PCI Ethernet Controller.
2. Click Next.
3. Insert the Intel Driver CD into the CD-ROM drive.
4. Select Search for the best driver for your device (Recommended).
5. Click Next. You are prompted to select the locations from where you wish
to search for new device drivers.
6. Select Specify a location and specify x: where x is the driver letter of the
CD-ROM drive.
7. Click Next.
8. Select The Updated Driver (Recommended) and click Next.
9. If the displayed driver is Intel PRO/100 SP Mobile Combo Adapter, click
Next; otherwise click Back and repeat Step 8.
10. At the Insert Disk window, click OK.
11. In the Copying files from the pulldown menu, select the CD-ROM drive
and click OK. A window opens, indicating that the PCI Ethernet
Controller device driver is being loaded. The Wizard then indicates that
the device driver has finished installing.
12. Click Finish to complete the installation of the PCI Ethernet Controller
device driver.
13. Click Yes to restart your computer.
14. When the computer restarts and the Wizard finds the PCI Serial
Controller, click Cancel.
15. Click Start→Run. Type x:\modem\win9x\setup.exe where x is the drive
letter of the CD-ROM drive.
16. Click OK on Do you want to install the modem driver?
Part 1: Installation and user’s guide 1-3