Filter
Top Products
Table 3: Supported Functions
Separate Homologation Country parameters in binary file [Except OS/2]
CLKRUN# support. CLKRUN# should not be asserted if no data transaction for modem
(or LAN)
NT 4.0 APM Support through TP port DD for Windows NT 4.0 with the latest service
pack
Note: Meter Tone (billing tone) filtering for Switzerland and Germany is not
included and must be provided by the user.
AT command summary
The following tables summarize the commands implemented by the modem.
Commands may be executed when the modem is in COMMAND mode.
COMMAND mode is entered upon under one of the following conditions:
v After restart
v At the termination of a connection
v After the execution of a command other than dial or answer commands
(ATO or AT&T)
v Upon the receipt of the ESCAPE SEQUENCE (three consecutive characters
matching the contents of S register 2) while on-line mode
v Upon the on-to-off transition of DTR if & D1, D2 or &D3 has been set
Table 4: AT Command Set Summary. The following table is from Lucent Technologies,
Host-Based Controller Modem AT Command Set, Version 1.1, June 15, 1998.
Command Description Command Description
A/ Repeat last command &J Auxiliary relay options
A Answer command &K Local flow control selection
B Communication
standard
&M Asynchronous communications
mode
C Carrier control &Q Asynchronous communications
mode
D Dial command &S Data set ready (DSR) option
E Echo command &T Self-test commands
F On-line data character
echo command
&V View the active configuration
H Hook control &W Store current configuration
I Request ID
information
&Y Select stored profile for hard
reset
L Monitor speaker
volume
&Z Store telephone number
B-2 Intel
®
PRO/100 SP Mobile Combo Adapter: User’s Guide