Filter
Top Products
Checking the System
3-2
3.23.2 Installing and Running UDAS SYSCHECKInstalling and Running UDAS SYSCHECK
UDAS SYSCHECK provides an easy-to-use graphical interface for using and displaying the I/O
capabilities of the UDAS unit.
System RequirementsSystem Requirements
• UDAS SYSCHECK 1.0 only runs on Windows 98.
• The installation requires approximately 1 Mbyte of free disk space.
Installing SYSCHECKInstalling SYSCHECK
1. To install UDAS SYSCHECK, insert the UDAS-1001E Data Acquisition System CD into the
CD ROM drive on the computer.
2. From the Windows 98 desktop, click Start, select Run and type:
<Use your CD drive letter>:\Syscheck\SETUP.EXE<ENTER>
3. Follow the software installation instructions in the dialogs (to stop the installation press ESC
or click Cancel).
When the installation is complete, UDAS SYSYCHECK files are copied to a newly created
folder on the computer’s hard drive. A new folder with shortcuts to the UDAS SYSCHECK
program appears on the Start menu.
3.33.3 SYSCHECK OperationSYSCHECK Operation
When SYSCHECK runs, it queries the Universal Serial Bus (USB) to locate all of the UDAS units
that are attached to the host. UDAS SYSCHECK reports the number of UDAS units detected and
tracks the UDAS units by a unique serial number assigned to each unit. The serial number is
provided on the outside of the unit, and internally in the UDAS unit’s firmware.
In the UDAS SYSCHECK window, the main menu contains three selection tabs, Unit Info,
System Check, and Paced Analog Input as shown in FIGURE 3.1, Unit Info dialog.
In the Unit Info dialog, select one UDAS unit from the drop-down list. After making your
selection, other features of the software allow you to display inputs to, or manipulate outputs
from, the selected UDAS unit.