Filter
Top Products
3-3
3.3.1 Unit Info
The Unit Info dialog displays the number of UDAS units detected and has a drop down list
containing the serial number for each UDAS unit detected by SYSCHECK.
FIGURE 3.1 Unit Info dialog
If there is only one UDAS unit, the message shown beneath the drop down list displays the unit
type and self-test results. When the self-test reads PASSED, the unit is operable.
If multiple UDAS units are being used, to select a unit for testing, click the desired serial number
in the list.This selection process updates the description and the self-test results to reflect the
state of the currently selected unit.
After you select a unit’s serial number from the list, the SYSCHECK and paced analog input
operations are performed on the selected unit.