Filter
Top Products
Connecting the LitePro 760
14 LitePro 760 User’s Guide
Connecting a Macintosh PowerBook
You’ll need an Apple PowerBook video-out cable to use the LitePro
with a PowerBook.
1.
Attach the video-out cable to the PowerBook.
2.
Attach one of the Mac adapters to the “Computer” end of the
LitePro cable. Attach the adapter (with the cable attached) to the
PowerBook’s video-out cable. Set the switch on the adapter to
“LoRes”.
3.
Tighten the thumb screws on all connectors.
4.
Turn on the LitePro 760 by pressing the “1” side of the power
switch. (Refer to “Powering Up the LitePro” on page 15.)
5.
Turn on the computer.
6.
Open the PowerBook’s Control Panel.
7.
Click “Mirroring”.
8.
Restart the PowerBook.
Osprey.bk Page 14 Monday, December 11, 2000 1:38 PM